Functions

MySQL provides built-in functions that perform special operations.

Aggregate Functions

Aggregate functions operate on a set of data. These are usually used to perform some action on a complete set of returned rows. For example, SELECT AVG(height) FROM kids would return the average of all the values of the height field in the kids table.

AVG( expression)

Returns the average value of the values in expression (e.g., SELECT AVG(score) FROM tests).

BIT_AND( expression)

Returns the bitwise AND aggregate of all the values in expression (e.g., SELECT BIT_AND(flags) FROM options). A bit will be set in the result if and only if the bit is set in every input field.

BIT_OR( expression)

Returns the bitwise OR aggregate of all the values in expression (e.g., SELECT BIT_OR(flags) FROM options). A bit is set in the result if it is set in at least one of the input fields.

COUNT( expression)

Returns the number of times expression was not null. COUNT(*) will return the number of rows with some data in the entire table (e.g., SELECT COUNT(*) FROM folders).

MAX( expression)

Returns the largest value in expression (e.g., SELECT MAX (elevation) FROM mountains).

MIN( expression)

Returns the smallest value in expression (e.g., SELECT MIN(level) FROM toxic_waste).

STD( expression)/STDDEV( expression)

Returns the standard deviation of the values in expression (e.g., SELECT STDDEV(points) FROM data).

SUM( expression)

Returns the sum of the values in expression (e.g., SELECT SUM(calories) FROM daily_diet).

General Functions

General functions operate on one or more discrete values. We have omitted a few rarely used functions with very specialized applications.

ABS( number)

Returns the absolute value of number (e.g., ABS(-10) returns "10").

ACOS( number)

Returns the inverse cosine of number in radians (e.g., ACOS(0) returns "1.570796").

ADDDATE( date, INTERVAL , amount, type)

Synonym for DATE_ADD.

ASCII( char)

Returns the ASCII value of the given character (e.g., ASCII(h) returns "104").

ASIN( number)

Returns the inverse sine of number in radians (e.g., ASIN(0) returns "0.000000").

ATAN( number)

Returns the inverse tangent of number in radians (e.g., ATAN(1) returns "0.785398").

ATAN2( X, Y)

Returns the inverse tangent of the point (X,Y) (for example, ATAN2(-3,3) returns "-0.785398").

BENCHMARK( num, function)

Runs function over and over num times and reports the total elapsed clock time. Without any arguments, this function returns "0".

BIN( decimal)

Returns the binary value of the given decimal number (e.g., BIN(8) returns "1000"). This is equivalent to the function CONV(decimal,10,2).

BIT_COUNT( number)

Returns the number of bits that are set to 1 in the binary representation of the number (e.g., BIT_COUNT(17) returns "2").

BIT_LENGTH( string)

Returns the number of bits in string (the number of characters times 8, for single-byte characters).

CASE value WHEN choice THEN returnvalue ... ELSE returnvalue END

Compares value to a series of choice values or expressions. The first choice to match the value ends the function and returns the corresponding returnvalue. The ELSE returnvalue is returned if no choice matches.

CEILING( number)

Returns the smallest integer greater than or equal to number (e.g., CEILING (5.67) returns "6").

CHAR( num1[ ,num2,. . .])

Returns a string made from converting each number to the character corresponding to that ASCII value (e.g., CHAR(122) returns "Z").

CHAR_LENGTH( string)

Multi-byte character set safe synonym for LENGTH().

CHARACTER_LENGTH( string)

Multi-byte character set safe synonym for LENGTH( ).

COALESCE( expr1, expr2, ...)

Returns the first non-null expression in the list (e.g., COALESCE(NULL, NULL, 'cheese', 2) returns "cheese").

CONCAT( string1[ ,string2,string3,. . .])

Returns the string formed by joining together all of the arguments (e.g., CONCAT('Hi',' ','Mom','!') returns "Hi Mom!").

CONCAT_WS( sep, string1, [ string2, ...])

Returns all strings as a single string, separated by sep.

CONNECTION_ID( )

Returns the ID of the current connection.

CONV( number, base1, base2)

Returns the value of number converted from base1 to base2. number must be an integer value (either as a bare number or as a string). The bases can be any integer from 2 to 36. Thus, CONV(8,10,2) returns "1000", which is the number 8 in decimal converted to binary.

COS( radians)

Returns the cosine of the given number, which is in radians (e.g., COS(0) returns "1.000000").

COT( radians)

Returns the cotangent of the given number, which must be in radians (e.g., COT(1) returns "0.642093").

CURDATE( )

Returns the current date. A number of the form YYYYMMDD is returned if this is used in a numerical context; otherwise, a string of the form 'YYYY-MM-DD' is returned (e.g., CURDATE( ) could return "1998-08-24").

CURRENT_DATE( )

Synonym for CURDATE( ).

CURRENT_TIME( )

Synonym for CURTIME( ).

CURRENT_TIMESTAMP( )

Synonym for NOW( ).

CURTIME( )

Returns the current time. A number of the form HHMMSS is returned if this is used in a numerical context; otherwise, a string of the form HH:MM:SS is returned (e.g., CURTIME( ) could return "13:02:43").

DATABASE( )

Returns the name of the current database (e.g., DATABASE( ) could return "mydata").

DATE_ADD( date,INTERVAL , amount, type)

Returns a date formed by adding the given amount of time to the given date. The type element to add can be one of the following: SECOND, MINUTE, HOUR, DAY, MONTH, YEAR, MINUTE_SECOND (as "minutes:seconds"), HOUR_MINUTE (as "hours:minutes"), DAY_HOUR (as "days hours"), YEAR_MONTH (as "years-months"), HOUR_SECOND (as "hours:minutes:seconds"), DAY_MINUTE (as "days hours:minutes") and DAY_SECOND (as "days hours:minutes:seconds"). Except for those time elements with specified forms, the amount must be an integer value (e.g., DATE_ADD("1998-08-24 13:00:00", INTERVAL 2 MONTH) returns "1998-10-24 13:00:00").

DATE_FORMAT( date, format)

Returns the date formatted as specified. The format string prints as given with the following values substituted:

%a

Short weekday name (Sun, Mon, etc.)

%b

Short month name (Jan, Feb, etc.)

%D

Day of the month with ordinal suffix (1st, 2nd, 3rd, etc.)

%d

Day of the month

%H

24-hour hour (always two digits, e.g., 01)

%h/%I

12-hour hour (always two digits, e.g., 09)

%i

Minutes

%j

Day of the year

%k

24-hour hour (one or two digits, e.g., 1)

%l

12-hour hour (one or two digits, e.g., 9)

%M

Name of the month

%m

Number of the month (January is 1)

%p

A.M. or P.M.

%r

12-hour total time (including A.M./P.M.)

%S

Seconds (always two digits, e.g., 04)

%s

Seconds (one or two digits, e.g., 4)

%T

24-hour total time

%U

Week of the year (new weeks begin on Sunday)

%W

Name of the weekday

%w

Number of weekday (0 is Sunday)

%Y

Four-digit year

%y

Two-digit year

%%

A literal % character

DATE_SUB( date, INTERVAL amounttype)

Returns a date formed by subtracting the given amount of time from the given date. The same interval types are used as with DATE_ADD (e.g., SUBDATE("1999-05-20 11:04:23", INTERVAL 2 DAY) returns "1999-05-18 11:04:23").

DAYNAME( date)

Returns the name of the day of the week for the given date (e.g., DAYNAME('1998-08-22') returns "Saturday").

DAYOFMONTH( date)

Returns the day of the month for the given date (e.g., DAYOFMONTH('1998-08-22') returns "22").

DAYOFWEEK( date)

Returns the number of the day of the week (1 is Sunday) for the given date (e.g., DAY_OF_WEEK('1998-08-22') returns "7").

DAYOFYEAR( date)

Returns the day of the year for the given date (e.g., DAYOFYEAR('1983-02-15') returns "46").

DECODE( blob, passphrase)

Decodes encrypted binary data using the specified passphrase. The encrypted binary is expected to be encrypted with the ENCODE( ) function:

mysql> 
SELECT DECODE(ENCODE('open sesame', 'please'), 'please');
   
+---------------------------------------------------+
| DECODE(ENCODE('open sesame', 'please'), 'please') |
+---------------------------------------------------+
| open sesame                                       |
+---------------------------------------------------+
1 row in set (0.01 sec)

DEGREES( radians)

Returns the given argument converted from radians to degrees (e.g., DEGREES(2*PI( )) returns "360.000000").

ELT( number,string1,string2, . . .)

Returns string1 if number is 1, string2 if number is 2, etc. A null value is returned if number does not correspond with a string (e.g., ELT(3, "once","twice","thrice","fourth") returns "thrice").

ENCODE( secret, passphrase)

Creates a binary encoding of the secret using the passphrase. You may later decode the secret using DECODE( ) and the passphrase.

ENCRYPT( string[ ,salt])

Password-encrypts the given string. If a salt is provided, it is used to add extra obfuscating characters to the encrypted string (e.g., ENCRYPT('mypass','3a') could return "3afi4004idgv").

EXP( power)

Returns the number e raised to the given power (e.g., EXP(1) returns "2.718282").

EXPORT_SET( num, on, off, [ separator, [ num_bits]])

Examines a number and maps the on and off bits in that number to the strings specified by the on and off arguments. In other words, the first string in the output indicates the on/off value of the first (low-order) bit of num, the second string reflects the second bit, and so on. Examples:

mysql> 
SELECT EXPORT_SET(5, "y", "n", "", 8);
   
+--------------------------------+
| EXPORT_SET(5, "y", "n", "", 8) |
+--------------------------------+
| ynynnnnn                       |
+--------------------------------+
1 row in set (0.00 sec)
   
mysql> 
SELECT EXPORT_SET(5, "y", "n", ",", 8);
   
+---------------------------------+
| EXPORT_SET(5, "y", "n", ",", 8) |
+---------------------------------+
| y,n,y,n,n,n,n,n                 |
+---------------------------------+
1 row in set (0.00 sec)

EXTRACT(interval FROM datetime)

Returns the specified part of a DATETIME (e.g., EXTRACT(YEAR FROM '2001-08-10 19:45:32') returns "2001").

FIELD( string,string1,string2, . . .)

Returns the position in the argument list (starting with string1) of the first string that is identical to string. Returns 0 if no other string matches string (e.g., FIELD('abe','george','john','abe','bill') returns "3").

FIND_IN_SET( string,set)

Returns the position of string within set. The set argument is a series of strings separated by commas (e.g., FIND_IN_SET ('abe', 'george, john, abe, bill') returns "3").

FLOOR( number)

Returns the largest integer less than or equal to number (e.g., FLOOR(5.67) returns 5).

FORMAT( number,decimals)

Neatly formats the given number, using the given number of decimals (e.g., FORMAT(4432.99134,2) returns "4,432.99").

FROM_DAYS( days)

Returns the date that is the given number of days (in which day 1 is Jan 1 of year 1) (e.g., FROM_DAYS(728749) returns "1995-04-02").

FROM_UNIXTIME( seconds[ , format])

Returns the date (in GMT) corresponding to the given number of seconds since the epoch (January 1, 1970 GMT). For example, FROM_UNIXTIME(903981584) returns "1998-08-24 18:00:02". If a format string (using the same format as DATE_FORMAT) is given, the returned time is formatted accordingly.

GET_LOCK( name,seconds)

Creates a named user-defined lock that waits for the given number of seconds until timeout. This lock can be used for client-side application locking between programs that cooperatively use the same lock names. If the lock is successful, "1" is returned. If the lock times out while waiting, "0" is returned. All others errors return NULL values. Only one named lock may be active at a time during a single session. Running GET_LOCK( ) more than once will silently remove any previous locks. For example: GET_LOCK("mylock",10) could return "1" within the following 10 seconds.

GREATEST( num1, num2[ , num3, . . . ])

Returns the numerically highest of all the arguments (for example, GREATEST(5,6,68,1,-300) returns "68").

HEX( decimal)

Returns the hexadecimal value of the given decimal number (e.g., HEX(90) returns "3a"). This is equivalent to the function CONV(decimal,10,16).

HOUR( time)

Returns the hour of the given time (e.g., HOUR('15:33:30') returns "15").

IF( test, value1, value2)

If test is true, returns value1, otherwise returns value2 (e.g., IF(1>0,"true","false") returns true).

IFNULL( value, value2)

Returns value if it is not null; otherwise, returns value2 (e.g., IFNULL(NULL, "bar") returns "bar").

INSERT( string,position,length,new)

Returns the string created by replacing the substring of string starting at position and going length characters with the string new (e.g., INSERT('help',3,1,' can jum') returns "he can jump").

INSTR( string,substring)

Identical to LOCATE except that the arguments are reversed (e.g., INSTR('makebelieve','lie') returns "7").

INTERVAL( A,B,C,D, . . . )

Returns "0" if A is the smallest value, "1" if A is between B and C, 2 if A is between C and D, etc. All values except for A must be in order (e.g., INTERVAL(5,2,4,6,8) returns "2", because 5 is in the second interval, between 4 and 6).

ISNULL( expression)

Returns "1" if the expression evaluates to NULL; otherwise, returns 0 (e.g., ISNULL(3) returns "0").

LAST_INSERT_ID( )

Returns the last value that was automatically generated for an AUTO_INCREMENT field (e.g., LAST_INSERT_ID( ) could return "4").

LCASE( string)

Synonym for LOWER( ).

LEAST( num1, num2[ , num3,. . .])

Returns the numerically smallest of all the arguments (for example, LEAST(5,6,68,1,-20) returns "-20").

LEFT( string,length)

Returns length characters from the left end of string (e.g., LEFT("12345",3) returns "123").

LENGTH( string)

Returns the number of bytes in string (e.g., LENGTH('Hi Mom!') returns "7").

LOAD_FILE( filename)

Reads the contents of the specified file as a string. This file must exist on the server and be world readable. Naturally, you must also have FILE privileges.

LOCATE( substring,string[ ,number])

Returns the character position of the first occurrence of substring within string (e.g., LOCATE('SQL','MySQL') returns "3"). If substring does not exist in string, 0 is returned. If a numerical third argument is supplied to LOCATE, the search for substring within string does not start until the given position within string.

LOG( number)

Returns the natural logarithm of number (e.g., LOG(2) returns "0.693147").

LOG10( number)

Returns the common logarithm of number (e.g., LOG10(1000) returns "3.000000").

LOWER( string)

Returns string with all characters turned into lowercase (e.g., LOWER('BoB') returns "bob").

LPAD( string,length,padding)

Returns string with padding added to the left end until the new string is length characters long (e.g., LPAD(' Merry X-Mas',18,'Ho') returns "HoHoHo Merry X-Mas").

LTRIM( string)

Returns string with all leading whitespace removed (e.g., LTRIM(' Oops') returns "Oops").

MAKE_SET( bits, string1, string2, ...)

Creates a MySQL SET based on the binary representation of a number by mapping the on bits in the number to string values. The first string will appear in the output if the first (low-order) bit of bits is set, the second string will appear if the second bit is set, and so on. Example:

mysql> 
SELECT MAKE_SET(5, "a", "b", "c", "d", "e", "f");
   
+-------------------------------------------+
| MAKE_SET(5, "a", "b", "c", "d", "e", "f") |
+-------------------------------------------+
| a,c                                       |
+-------------------------------------------+
1 row in set (0.01 sec)

MD5( string)

Creates an MD5 checksum for the specified string. The MD5 checksum is always a string of 32 hexadecimal numbers.

MID( string,position,length)

Synonym for SUBSTRING( ) with three arguments.

MINUTE( time)

Returns the minute of the given time (e.g., MINUTE('15:33:30') returns "33").

MOD( num1, num2)

Returns the modulo of num1 divided by num2. This is the same as the % operator (e.g., MOD(11,3) returns "2").

MONTH( date)

Returns the number of the month (1 is January) for the given date (e.g., MONTH('1998-08-22') returns "8").

MONTHNAME( date)

Returns the name of the month for the given date (e.g., MONTHNAME('1998-08-22') returns "August").

NOW( )

Returns the current date and time. A number of the form YYYYMMDDHHMMSS is returned if this is used in a numerical context; otherwise, a string of the form 'YYYY-MM-DD HH:MM:SS' is returned (e.g., NOW( ) could return "1998-08-24 12:55:32").

NULLIF( value, value2)

Return NULL if value and value2 are equal, or else returns value (e.g., NULLIF((5+3)18,1) returns NULL).

OCT( decimal)

Returns the octal value of the given decimal number (e.g., OCT(8) returns "10"). This is equivalent to the function CONV(decimal,10,8).

OCTET_LENGTH( string)

Synonym for LENGTH( ).

ORD( string)

Returns a numeric value corresponding to the first character in string. Treats a multi-byte string as a number in base 256. Thus, an 'x' in the first byte is worth 256 times as much as an 'x' in the second byte.

PASSWORD( string)

Returns a password-encrypted version of the given string (e.g., PASSWORD('mypass') could return "3afi4004idgv").

PERIOD_ADD( date,months)

Returns the date formed by adding the given number of months to date (which must be of the form YYMM or YYYYMM) (e.g., PERIOD_ADD(9808,14) returns "199910").

PERIOD_DIFF( date1, date2)

Returns the number of months between the two dates (which must be of the form YYMM or YYYYMM) (e.g., PERIOD_DIFF(199901,8901) returns "120").

PI( )

Returns the value of pi: "3.141593".

POSITION( substring,string)

Synonym for LOCATE( ) with two arguments.

POW( num1, num2)

Returns the value of num1 raised to the num2 power (e.g., POWER(3,2) returns "9.000000").

POWER( num1, num2)

Synonym for POW( ).

QUARTER( date)

Returns the number of the quarter of the given date (1 is January-March) (e.g., QUARTER('1998-08-22') returns "3").

RADIANS( degrees)

Returns the given argument converted from degrees to radians (e.g., RADIANS(-90) returns "-1.570796").

RAND([ seed])

Returns a random decimal value between 0 and 1. If an argument is specified, it is used as the seed of the random number generator (e.g., RAND(3) could return 0.435434).

RELEASE_LOCK( name)

Removes the named lock created with the GET_LOCK function. Returns "1" if the release is successful, "0" if it failed because the current thread did not own the lock, and a null value if the lock did not exist. For example, RELEASE_LOCK("mylock").

REPEAT( string,number)

Returns a string consisting of the original string repeated number times. Returns an empty string if number is less than or equal to zero (e.g., REPEAT('ma',4) returns "mamamama").

REPLACE( string,old,new)

Returns a string that has all occurrences of the substring old replaced with new (e.g., REPLACE('black jack`,'ack`,'oke`) returns "bloke joke").

REVERSE( string)

Returns the character reverse of string (e.g., REVERSE('my bologna') returns "angolob ym").

RIGHT( string,length)

Synonym for SUBSTRING( ) with FROM argument (e.g., RIGHT("string",1) returns "g").

ROUND( number[ ,decimal])

Returns number rounded to the given number of decimals. If no decimal argument is supplied, number is rounded to an integer (e.g., ROUND(5.67,1) returns "5.7").

RPAD( string,length,padding)

Returns string with padding added to the right end until the new string is length characters long (e.g., RPAD('Yo',5,'!') returns "Yo!!!").

RTRIM( string)

Returns string with all trailing whitespace removed (e.g., RTRIM('Oops `) returns "Oops").

SECOND( time)

Returns the seconds of the given time (e.g., SECOND('15:33:30') returns "30").

SEC_TO_TIME( seconds)

Returns the number of hours, minutes, and seconds in the given number of seconds. A number of the form HHMMSS is returned if this is used in a numerical context; otherwise, a string of the form HH:MM:SS is returned (e.g., SEC_TO_TIME(3666) returns "01:01:06").

SESSION_USER( )

Synonym for USER( ).

SIGN( number)

Returns -1 if number is negative, 0 if it's zero, or 1 if it's positive (e.g., SIGN(4) returns "1").

SIN( radians)

Returns the sine of the given number, which is in radians (e.g., SIN(2*PI( )) returns "0.000000").

SOUNDEX( string)

Returns the Soundex code associated with string (e.g., SOUNDEX('Jello') returns "J400").

SPACE( number)

Returns a string that contains number spaces (e.g., SPACE(5) returns " ").

SQRT( number)

Returns the square root of number (e.g., SQRT(16) returns "4.000000").

STRCMP( string1, string2)

Returns 0 if the strings are the same, -1 if string1 would sort before string2, or 1 if string1 would sort after string2 (e.g., STRCMP('bob','bobbie') returns "-1").

SUBDATE( date,INTERVAL amounttype)

Synonym for DATE_SUB( ).

SUBSTRING( string,position)

SUBSTRING( string FROM position)

Returns the remaining substring from string starting at position.

SUBSTRING( string,position,length)

SUBSTRING( string FROM position FOR length)

Returns a substring of string starting at position for length characters (e.g., SUBSTRING("123456",3) returns "3456").

SUBSTRING_INDEX( string,char,number)

Returns the substring formed by counting number of char within string and then returns everything to the left if the count is positive, or everything to the right if the count is negative (e.g., SUBSTRING_INDEX('1,2,3,4,5',',',3) returns "1,2,3").

SYSDATE( )

Synonym for NOW( ).

SYSTEM_USER( )

Synonym for USER( ).

TAN( radians)

Returns the tangent of the given number, which must be in radians (e.g., TAN(0) returns "0.000000").

TIME_FORMAT( time, format)

Returns the given time using a format string. The format string is of the same type as DATE_FORMAT, as shown earlier.

TIME_TO_SEC( time)

Returns the number of seconds in the time argument (e.g., TIME_TO_SEC('01:01:06') returns "3666").

TO_DAYS( date)

Returns the number of days (in which day 1 is Jan 1 of year 1) to the given date. The date may be a value of type DATE, DATETIME, or TIMESTAMP, or a number of the form YYMMDD or YYYYMMDD (e.g., TO_DAYS(19950402) returns "728749").

TRIM([BOTH|LEADING|TRAILING] [ remove] [FROM] string)

With no modifiers, returns string with all trailing and leading whitespace removed. You can specify to remove the leading or trailing whitespace, or both. You can also specify a character other than space to be removed (e.g., TRIM(both '-' from '---look here---') returns "look here").

TRUNCATE (number, decimals)

Returns number truncated to the given number of decimals (for example, TRUNCATE(3.33333333,2) returns "3.33").

UCASE( string)

Synonym for UPPER( ).

UNIX_TIMESTAMP([ date])

Returns the number of seconds from the epoch (January 1, 1970 GMT) to the given date (in GMT). If no date is given, the number of seconds to the current date is used (e.g., UNIX_TIMESTAMP('1998-08-24 18:00:02') returns "903981584".

UPPER( string)

Returns string with all characters turned into uppercase (e.g., UPPER ('Scooby') returns "SCOOBY").

USER( )

Returns the name of the current user (e.g., SYSTEM_USER( ) could return "generic@localhost").

VERSION( )

Returns the version of the MySQL server itself (e.g., VERSION( ) could return "4.0.2-alpha").

WEEK( date)

Returns the week of the year for the given date (e.g., WEEK('1998-12-29') returns "52").

WEEKDAY( date)

Returns the numeric value of the day of the week for the specified date. Day numbers start with Monday as 0 and end with Sunday as 6.

YEAR( date)

Returns the year of the given date (e.g., YEAR('1998-12-29') returns "1998").